 October 3, 2020  245 views,  0 comments |
----------------------------------------------------------------------------------------------
HOW TO?? | Defrag your hard drive...
|
|
Over time, files on your hard drive become fragmented. As your computer now has to check in multiple places for the pieces, it can run more slowly. The term ‘defragment’ sounds a little dramatic, but it basically means putting those files back together so your system can run more efficiently.
In fact, it’s something that Windows 10, 8, and 7 do automatically on a set schedule. The default schedule is once per week, but you can go in and manually run it if you suspect there’s an issue.
First, it’s important to note that you only need to do this if your computer uses a traditional mechanical Hard Disk Drive (HDD). A Solid State Drive (SSD) works differently from an HDD, and there is no need for defragmentation. If you have both, only defragment the HDD.
Go to My Computer and right-click the hard drive (by default named WINDOWS (C:) though you may have renamed it). Then go to Properties/Tools and under Optimize and defragment drive, click Optimize.
You’ll then get an Optimize Drives screen popup.
Note that in the above screenshot, all of the drives are SSD. These do not need to be defragmented. As in the image, Analyze will be grayed out for SSD drives, but will be available for hard drives.
Select an HDD drive and click Analyze to see how fragmented it is. A good rule of thumb would be to keep it below 5%. If it’s above, you can click Optimize to defragment the disk.
If you have an SSD, you’ll notice Optimize is actually an available option. Clicking it will run the TRIM command which will wipe data that is no longer considered in use.
Windows 7: Look for Disk Defragmenter using the search bar and select an HDD under Current status.
|
----------------------------------------------------------------------------------------------
 Comments 0
There are no comments ......
 Note:
Guests comments are allowed ...
|
|
|
|
|
|
|
|
|
